Excellent "10" features.
High quality in everything!
High quality in everything!
Comparison with other products
| Sheet type／Function | Thermal insulation |
Heat shielding |
UV CUT | Condensation | Power saving | Scattering | Lighting | Privacy |
|---|---|---|---|---|---|---|---|---|
| This productCool Magic Window | ◎ | ◎ | ◎ | ◎ | ◎ | ◎ | ◎ | ◎ |
| Transparent film type | △ | × | 〇～◎ | × | △ | × | ◎ | × |
| Aluminum film type | ◎ | × | ◎ | △ | △ | × | × | ◎ |
| Aluminum film type Insulated type |
◎ | ◎ | ◎ | ◎ | ◎ | × | × | ◎ |
| Short review | |
|---|---|
| This productCool Magic Window | A perfect film that is bright with high lighting and has all the functions. |
| Transparent film type | The UV effect is high, but the heat shielding performance is basically low. Since there is no heat insulation performance, there is no condensation or power saving effect. Good lighting due to high transparency. However, it can be said that it is not suitable for privacy measures. |
| Aluminum film type | High heat shielding and UV effect. Since there is no heat insulation performance, there is no condensation or power saving effect. The room is basically dark with a silver color. It is not visible from the outside, so it is good as a privacy measure. |
| Aluminum film type Insulated type |
It has high heat shielding, heat insulation, and UV effects, so it also has dew condensation and power saving effects. However, it is basically silver and the room becomes pitch black. It is not visible from the outside, so it is good as a privacy measure. |
| Our research | |
Reliable quality
This quality is made possible because it is made in Japan. A third-party organization has also verified the wonderful effect.
Usage
- ※Cannot be used on glass with cracks, scratches, or other damage.
- ※In cases other than the above ◎, thermal cracking may occur depending on the situation. If you have any questions, please contact the window glass manufacturer.
- ※Thermal cracking is a phenomenon that can also occur in curtains.
Paste procedure
| quality display | |
|---|---|
| Material | Body：Polyethylene, Aluminized polyester |
| Adhesive：Acrylic | |
| Protective film：Polyester | |
| Size | About 900mm×1800mm, About 4mm thick |
| Quantity | 1 piece |
Confirmation
- Regarding the function and compatible glass, it is an experimental value, not a guaranteed value.
- Shatterproof does not mean the glass will not break.
- We do not guarantee any damage or damage during use.
Precautions for use
- We use a removable adhesive, but if you are concerned about adhesive residue, we recommend replacing it after about 12 months.
- Depending on the conditions of use, the adhesive may deteriorate and leave adhesive residue or an odor.
- It is a type that does not easily leave glue residue, so it is a type with relatively weak adhesion. If it feels weak or comes off, please prepare a separate tape to reinforce it.
- Do not use the product in places where the surface becomes hot.
- Do not apply at low temperatures (below 10°C) as this may cause the adhesive strength to decrease.
- If you want to stick it on something other than window glass, please do a trial paste. (It may not stick to uneven or rough surfaces.)
- Do not apply it to wood, wallpaper, or painted surfaces as it may damage the surface or paint.
- Do not use chemical wipes to wipe off oil, water, dust, dirt, etc.
- Please note that dirt and dust may get between the sheet and the application surface, and insufficient pressure may cause air bubbles to form.
- Even in the case of compatible glass, the glass may occasionally break.
- If you touch the adhesive surface with your hand or reapply it many times, the adhesive strength will decrease. When removing, slowly peel off from the edge. Also, if you warm the product with a hair dryer, etc., it will be easier to peel off.
- The deposition surface may fade and become thinner if exposed to direct sunlight.。
- In the unlikely event that glue remains on the glass surface, wipe it off with an aqueous solution of a mixture of neutral detergent and hot water.
- The protective film is slippery, so please be careful when handling it after removing it.
- Due to the characteristics of the product, it smells like glue. Please ventilate well when using.
- White spots may appear on the adhesive layer, but this does not affect the quality because the UV absorber is partially crystallized.
- Combustible material. Keep away from fire.
- When storing, keep out of reach of children and in a cool, dark place out of direct sunlight.
- We do not guarantee any damage or damage during use.
- Since the product is an adhesive product, please be careful not to let infants and children mischief.
- Do not use it for anything other than its intended purpose.
- When disposing, please dispose according to the method specified by each local government.